View As Webpage
  Canadian Biomass    
<center>AMANDUS KAHL’s  flagship, pellet mill 65-1500, at WPAC</center>

AMANDUS KAHL’s flagship, pellet mill 65-1500, at WPAC

AMANDUS KAHL is one of the leading manufacturers of plants for conditioning feed, food, biomass, wood, straw, waste tyres, sewage sludge, plastics scrap as well as domestic and industrial waste.

The proven flat die technology used in all KAHL presses is also utilised in this new machine, which is particularly suitable for pelleting fibrous materials such as biomass and wood. The first 65-1500 press for wood pelleting was installed in the plant of a large wood pellet producer in the USA who already owns a number of type 60-1250 presses. The 65-1500 press has been designed especially for higher capacities. The 65-1500 is AMANDUS KAHL’s answer to the permanent challenge of reducing the investment costs per ton of produced wood pellets and of further reducing the operating costs.

Following several months of operation, the pellet producer was able to reach output of 10 t/h according to their own statistics. It could be observed that the service life of the dies increased disproportionately due to the larger die and the larger open perforated surface.

With the 65-1500 flat-die pellet mill, AMANDUS KAHL has broken new ground in the economic production of wood pellets. Before being introduced to the market, the 65-1500 press had been extensively tested and verified in KAHL’s pilot plant. Following successful tests, these efforts were rewarded with an order for several presses from the US producer, who was looking to increase the production capacity.

Learn More