View As Webpage | View Archives
|
|
As companies seek design process improvements, CAD system update is a common solution, resulting in reduced design time and improved product quality. Solid Edge improves the transition and re-use of 2D to 3D data, speeds performance of massive assembly adjustments and uses Synchronous Technology for easy revisions. Click to learn more: top ten ways Solid Edge will improve your engineering process.
» Learn More |
|
|
|
|
Daemar’s Range of HNBR Elastomers are superior to NBR in low brittle temperatures, and more resistant to oil, oil additives and sour gasoline and ozone than NBR. To keep up with the rising demand of cold weather applications for HNBR, our 80 durometer HNBR o-rings are temperature rated to -50°C. To fight leaks and to withstand attack by the most aggressive chemicals at temperatures down to –42 °C look to Kalrez® 0040 O-rings.
» Learn More |
|
|
|
|
What engineers need to know when using CV as a measurement of flow in pneumatic applications in the pneumatic industry, CV is one standard for expressing the flow capacity of devices used in a pneumatic system. However, there are multiple other standards that also express flow capacity. Some common terms engineers might encounter include CV, C, effective orifice size, and normal liters per minute, as well as actual flow rates at specific pressure differentials.
» Learn More |
|
|
|
|
Coiled Pins were designed with assembly in mind. They are easy to install, and there are several options available for how to insert them into an assembly. This White Paper provides an overview of the Coiled Pin installation options: hammer, manual press, air hammer, and automatic installation equipment. Additional considerations like custom fixturing and spring-loaded alignment pins are also addressed.
» Download your free White Paper here |
|
|
|
