|
 |
| |
|
|
|
|
| |
|
WE ARE TEAM PROTOMACH GML
|
|
The CNC Machining center for previously cut to length profiles can machine 2 profiles at the same time. Up to 10 tools can be programmed to machine the pre-cut frames, sashes or mullions as per the fabrication required. The programs are adaptable for various profiles and hardware types (upon approval of drawings). A computer is used to transfer information from your fabrication software to the machine’s PLC. A measurer installed at the entrance will reposition the machinings on the part if the length is longer or shorter then it’s supposed to be. Includes infeed pusher. The maximum profile length is 2800mm or 9.1’ (longer upon request).
Our PROMCP machining center combined with a Protomach double-head saw can receive the list of machining operations to be done on the cut parts. Depending on the desired flow, a single operator can feed the saw and the machining center. We also offer a cut optimization software and waste management software for remaining pieces (for the saw).
We design, cut, weld, assemble and program your entire project at our factory. Also, the software is entirely programmed by our team, there are no subcontractors.
We specialize in the area of windows, patio doors, entry doors and garage doors. With our team of dedicated people, we are known for our flexibility and ability to adapt to your needs, see the tailor. It is with respect and professionalism that we support our customers.
Manufactured using North American components, backed by our local suppliers highly technical support staff.
|
| |
|
| |
|
|
| |
|
| | |
