 |
Especially during cold, dry seasons, static buildup can become a problem on production lines and assembly stations.
Parts and products can cling together, causing jams in rollers and sorters. Meters and controls can give false readings, disrupting proper speeds and feeds. In some cases, static discharge can even cause injury to workers!
If any of these problems occur, valuable time is lost as production is paused to address it. Fortunately, there are ways to reduce or eliminate the creation of static. |
Intellistat® Ion Air Gun |
 |
• |
Ideal for blowoff applications requiring non-conductivity such as circuit board or electronic manufacturing. |
|
| |
• |
A small amount of compressed air is used to produce a stream of ionized air for both static and particulate removal. |
|
| |
• |
Classified for use in ISO 14644-1 Class 5 cleanrooms. |
|
| |
• |
Exceptional static decay rates capable of reducing 1000 volts to less than 100 in under one second. |
|
| |
• |
Short-throw trigger and lightweight polycarbonate frame allows for extended use without fatigue. |
|
|
|
|
|
Static Elimination White Paper |
EXAIR's White Paper, "Basics of Static Electricity", is an in-depth look at the causes of static electricity, the steps that can be taken to eliminate static, and the products available to help control it.
|
|
|
|
 |
Static Elimination Video Shows
How Static Could Be Affecting Your Factory |
EXAIR offers a series of videos that show you what creates static charges on the production line, how to locate them and many ways to quickly alleviate the problem before production comes to a screeching halt!
|
|
|
|
Gen4® Super Ion Air Knife |
|
• |
A small amount of compressed air produces a powerful, laminar sheet of ionized air that sweeps surfaces clean of static, particulates, dust and dirt up to 20 feet (6.1m) away. |
|
| |
• |
Removes static electricity from plastics, webs, sheet stock and other product surfaces where a static charge can build up. |
|
| |
• |
Includes a metal armored high voltage cable to protect against abrasion and cuts, integrated ground connection and electromagnetic shielding. |
|
| |
• |
Engineered to generate low noise and prevent dead-ending. |
|
|
|
|
|
|
EXAIR LLC * 11510 Goldcoast Dr * Cincinnati, OH * 45249-1621
Phone: +01 513.671.3322 * Fax: +01 513.671.3363
Contact Us |
Copyright © 2025 EXAIR LLC. All rights reserved. |
